 | DC-Bore |
| Bore hole logs acc. to DIN 4023:2006 / EN ISO / VSS / OENORM / BS 5630 |
 | DC-Bore-LS |
| Layer specifications acc. to DIN 4022 p. 1 and EN ISO 22 475-1 Only in combination with DC-Bore |
 | DC-Bore-LS2 |
| Layer specifications acc. to DIN 4022 p. 2 Only in combination with DC-Bore |
 | DC-Bore-LS3 |
| Layer specifications acc. to DIN 4022 p. 3 Only in combination with DC-Bore |
 | DC-Bore Well Graphics
|
| Wells and ground water measuring points acc. to DIN 4943:2005 Only in combination with DC-Bore |
 | DC-Probe |
Dynamic probing acc. to DIN 4094 / SN 670 417
|
 | DC-Section |
| Geological sections, site map, Auto-section |
| DC-Section Basic |
| Arrangement of bore profiles, SPT, well/gauge and probings on plans up to A0, with drawing functions |
 | DC-GIS |
| Administration of borings, probings, etc. in maps (Geo referencing) |
 | DC-Cone |
| Cone penetration tests acc. to DIN 4094 |
 | DC-Sieve |
| Sieve and sedimentation analysis acc. to DIN 18123 / SN 670 810/816 / OENORM B 4412 / CEN ISO/TS 17892-4 |
 | DC-Load |
| Plate load test acc. to DIN 18 134 / SN 670 317 |
 | DC-Press |
| Compression / oedometer test |
 | DC-Proc |
| Proctor test acc. to DIN 18 127 / SN 670 330 |
 | DC-Cons |
| Atterberg's consistency limits acc. to DIN 18 122 / SN 670 345 / OENORM B 4411 /CEN ISO/TS 17892-12 |
 | DC-Shear |
| Shear strength test acc. to DIN 18 137 |
 | DC-Dens |
Density acc. to DIN 18125 / SN 670 335 /
Water content acc. to DIN 18 121 / SN 670 340 |
 | DC-Perm |
| Permeability test acc. to DIN 18 130 and EN ISO/TS 17892-11 |
 | DC-Pump |
| Pump test graphic and evaluation |
 | DC-Chem |
| Display of old load survey with limit value database |
 | DC-Glow |
| Glow loss acc. to DIN 18 128 |
 | DC-Lime |
| Lime content acc. to DIN 18 129 |
